Microfocus X-ray Inspection System X6800
The micro-focus X-ray tube of the X-ray inspection system can generate X-rays, penetrate the products you need to inspect, and then reach the flat panel detector. Finally the flat panel detector converts the X-rays into digital signals and displays them to you.
1. Working Principle
2. Application Example
BGA solder bridge
PCB QFN & gold wire
BGA solder voids
LED solder voids
Steel pipe welding gap
LED gold wire crack
1. Japan Hamamatsu X-ray tube, the best closed type X-ray tube in the world, with more than 10000 hours lifetime, maintenance-free.
2. New generation Korea Rayence HD digital flat panel detector (FPD), eliminate the image intensifier.
3. FPD instead of the table can tilt 60°, won’t reduce the magnification.
4. Automatic navigation window, the table will move to where you click.
5. 530*530mm table with 10KG load capacity.
6. Speed adjustable 5 axis linkage system can keep the image central while tilting.
7. Can edit inspection procedures to achieve automated inspection in large quantities.
8. Easy to operate, can quickly find defects, only need 2 hours to train.
1. X6800 Hardware Parameters
|X-ray source||Brand||Japan Hamamatsu|
|Max tube voltage||90kV|
|Max tube current||200μA|
|Focal spot size||5μm|
|Flat panel detector||Brand||Korea Rayence|
|Equipment||Magnification||Geometry 200X, System 1500X|
|Inspection speed||Max 3.0s/point|
|Dimensions||1360mm (L) * 1365mm (W) * 1630mm (H)|
|Power supply||AC110-220V 50/60HZ|
|Industrial PC||I3-7100 CPU, 4G RAM, 240GB SSD|
|Displayer||24" HDMI LCD|
|Safety||Radiation leakage||No leakage, international standard: ≤1μSv/h|
|Lead glass observation window||Transparent lead glass window shields radiation to observe the inner status.|
|Window and back door safety interlock||Once users open the window or back door, X-ray tube will power off immediately. When the window or back door is open, users can't turn on the X-ray.|
|Electromagnetic safety switch||Lock once the X-ray is on, users can't open the observation window.|
|Emergency stop||Next to the operation position, press to power off.|
|Tube protection||User can't leave the software to if you don't close the X-ray tube.|